Surfactant Associated Protein D (SPD) Antibody Pair

Catalogue No: abx370825
Price: £890.00
(Size: 5 × 96 tests)
Reviews: 0 reviews
(0 reviews)

Click on the image to see the image legend

Available Options

* Size:


Surfactant Associated Protein D (SPD) Antibody Pair for use in Sandwich ELISA assay development. The 10 × 96 tests size contains:
  • 400 µg Surfactant Associated Protein D (SPD) mouse monoclonal capture antibody,
  • 100 µg Surfactant Associated Protein D (SPD) biotin-conjugated mouse monoclonal detection antibody,
  • 10 µg Surfactant Associated Protein D (SPD) standard.
It is recommended to use this antibody pair with abx098958 Antibody Pair Support Kit (Sandwich Method).

Target Surfactant Associated Protein D (SPD)
Reactivity Mouse
Tested Applications ELISA
Recommended dilutions Dilute the Capture Antibody 125-fold with Coating Buffer.
Dilute the biotin-bonjugated Detection Antibody 200-fold with Detection Antibody Diluent.

Optimal dilutions/concentrations should be determined by the end user.
Form Liquid (Capture Antibody and Detection Antibody)
Reconstitution Reconstitute the standard with Standard Diluent. The volume, and therefore standard concentration, should be determined by the end user.
Storage Aliquot and store at -20°C. Avoid repeated freeze/thaw cycles.
Buffer The capture and detection antibody both contain 0.1% sodium azide.
Test Range 62.5 pg/ml - 4000 pg/ml
Standard Form Lyophilized
Assay Type Sandwich
Capture Antibody Host Mouse
Detection Antibody Host Mouse
Capture Antibody Clonality Monoclonal
Detection Antibody Clonality Monoclonal
Capture Antibody Conjugation Unconjugated
Detection Antibody Conjugation Biotin
Concentration 400 µg/0.8 ml (Capture Antibody), 100 µg/0.5 ml (Detection Antibody), 10 µg (Standard)
Directions for use Bring all components to room temperature (18-25°C) and briefly spin or centrifuge the vials before use. Working solutions should be prepared and used immediately.

Recommended Procedure:

  1. Dilute the Capture Antibody to working concentration using Coating Buffer. Immediately coat the 96-well plate with diluted Capture Antibody (100 µl per well). Seal the plate and incubate at 4 °C overnight or at 37 °C for 2 hours
  2. Aspirate the wells and wash with Wash Buffer (350 µl per well) and allow to soak for 1-2 min. Remove the liquid by inverting and tapping the plate on to absorbent paper.
  3. Block the plate with Blocking Buffer (200 µl per well) at 37 °C for 1.5 hours.
  4. Repeat the aspiration/wash process in Step 2.
  5. Add 100 µl of standards or sample into the appropriate wells. Cover with a plate sealer and incubate at 37 °C for 1 hour.
  6. Repeat the aspiration/wash process in Step 2.
  7. Add appropriately diluted biotin-conjugated Detection Antibody (100 µl per well). Cover the plate with a new plate sealer and incubate at 37 °C for 1 hour.
  8. Repeat the aspiration/wash process in Step 2.
  9. Add appropriately diluted Streptavidin HRP (100 µl per well). Cover the plate with a new plate sealer and incubate at 37 °C for 30 min.
  10. Repeat the aspiration/wash process in Step 2.
  11. Add Substrate Solution (90 µl per well). Cover the plate with a new plate sealer and incubate at 37 °C for 10-20 min. Keep the plate in the dark and avoid exposure to light.
  12. Add Stop Solution (50 µl per well). Tap the side of the plate to ensure thorough mixing.
  13. Measure the absorbance immediately using a microplate reader set at 450 nm.
Availability Shipped within 5-20 working days.
Note This product is for research use only.
Research Articles on Surfactant Associated Protein D (SPD) Antibody Pair

Write a review

Your Name
Your Email Address
PMID
DOI
Type
Your Review

Note: HTML is not translated!

Rating Bad Good